FacebookTwitterInstagramPinterest
info@saeesolution.com

TR-PHOTO-W-TRIGA

DETECTOR SPACING AND APPLICATIONS
Triga recommends spacing detectors in compliance with NFPA 72. In low airflow applications with smooth ceiling, space detectors 30 feet (9m). For specific information regarding detector spacing, placement, and special applications refer to NFPA 72.

INSTALLATION
The TR-PHOTO-W Series plug-in detectors use a separate base to simplify installation, service, and maintenance. Installation instructions are shipped with each detector. Mount base (all base types) on an electrical backbox which is at least 1.5″ (3.81 cm) deep.

NOTE:
• Because of the inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class “B”) wiring.
• When using relay or sounder bases, consult the installation sheet for device limitations between isolator modules and isolator bases.

ORDERING INFORMATION
TR-PHOTO-W: White, low-profile intelligent photoelectric sensor.
TR-PHOTO-IV: Ivory, low-profile intelligent photoelectric sensor.
TR-PHOTO-T-W: White, same as the TR-PHOTO-W, but includes a built-in 135°F (57°C) fixed-temperature thermal device.
TR-PHOTO-T-IV: Same as TR-PHOTO- T but in Ivory.
TR-PHOTO-R-W: White, low-profile intelligent photoelectric sensor, remote test capable. For use with duct

Category:

Description

Triga’s TR-PHOTO-W Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. TRIGA SMOKE DETECTOR has new modern profile for improved aesthetics. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. TR-PHOTO-W has Stable communication technique with noise immunity.

The TR-PHOTO-W Series detector sensitivity can be programmed in the control panel software. TRIGA SMOKE DETECTOR has built-in functional test switch activated by external magnet. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. TR-PHOTO-W plugs into separate base for ease of installation and maintenance.

Low standby current, Two-wire SLC connection, Optional remote, single- gang LED accessory, Dual LED design provides 360° viewing angle, Remote test feature from the panel- This are the common advantages of TRIGA SMOKE DETECTOR.

  • Other FEATURES
    Built-in tamper-resistant feature
    Sealed against back pressure
    Expanded color options
    Optional relay, isolator, and sounder bases

Reviews

There are no reviews yet.

Be the first to review “TR-PHOTO-W-TRIGA”

Your email address will not be published. Required fields are marked *

Related products

Go to Top