FacebookTwitterInstagramPinterest
info@saeesolution.com
  •

    PRESSURE SWITCH (shield)-SD-PS1001

    FACTORY SETTING

    • SD-PS1001 / SD-PS1002 : 4-8 PSI
    • SD-PS4001 : Operates at decreasing pressure at 30 PSI
    • SD-PS4002 : Operates at increasing pressure at 50 PSI and decreasing pressure at 30 PSI
    • SD-PS12001 : Operates at decreasing pressure at 110 PSI
    • SD-PS12002 : Operates at increasing pressure at 130 PSI and decreasing pressure at 30 PSI

    APPROXIMATE DIFFERENTIAL

    • SD-PS1001/SD-PS1002: 3 PSI throughout range
    • SD-PS4001/SD-PS4002 : 3 PSI @ 10 PSI & 6 PSI @ 100PSI
    • SD-PS12001/SD-PS12002 : 3 PSI @ 10 PSI & 9 PSI @ 200 PSI
    • Pressure Connection: ½˝ NPT male glass reinforced nylon
    • Contact Rating: 10 A @125/250 VAC 2.5 A @ 30VDC
    • Temperature Range: -40°F to 140°F (-40°C to 60°C)

    SERVICE USE

    • Automatic Sprinkler: NFPA 13
    • One or Two Family Dwelling: NFPA 13D
    • Residential Occupancies up to 4 Stories: NFPA 13R
    • National Fire Alarm Code: NFPA 72
    Details

  • SELF STANDING HOSE CABINET

    • LPCB Certified.
    • Cabinet material made of Electro Galvanized sheet or Stainless Steel Sheet (Full stainless steel brush or mirror finish).
    • Locking of cabinet is either key operated or round handle cam latch.
    • Cabinets are available either in surface mounted or recessed mounted type.
    • Cabinet door shall be solid door or glass door (Clear glass or wired glass).
    • Breeching inlet cabinets are available in horizontal or vertical version.
    Details

  • HOSE PIPE ASSEMBLY (65MM)

    The single jacket hose made of high tenacity polyester staple and polyester filaments. Lining is natural rubber. Jacket is plain. There is a special adhesion between the jacket and the rubber.

    Model No. Diameter Service Test Pressure (Bar/Psi) Hydrostatic Strength Test Presure (Bar/Psi) Standard Compliance/ Approvals
    NF-FH38 1.5 14/200 50/725 UL19,NFPA 1961/ UL listed
    NF-FH65 2.5 14/200 50/725

    *NH threaded. Storz & instantaneous coupling or other types are available upon request.

    Details

  • PILLAR HYDRANT (WET TYPE)

    • Body Material: Ductile Iron.
    • Nominal Pressure 250 psi., Test Pressure: 500 psi.
    • O-ring sealed flanges at the bonnet ground line and shoe simplify maintenance by eliminating gasket adhesion at these points, making disassembly easier. The O-rings are easier than flat gaskets to position during reassembly, and provide superior pressure handling.
    • Hold-down nut - features integral weather seal. Prevents unauthorized removal of hold-down nut or operating nut. Resilient wiper seal prevents water entry and protects from freezing; material resistant to sunlight deterioration. O-ring provides second level seal.
    • Safety flange - breaks cleanly to help prevent barrel damage, but strong enough to withstand normal handling. Allows economical repair, adding of extension section, rotation or changing of upper barrel without excavation.
    • Full flow openings - large, smooth radius hose and pumper openings reduce friction loss.
    Details

  • 4 WAY BREACHING INLET

    Model No. NWR 115 & NWRX 115
    Inlet Connection 4 Nos. Male Instantaneous Connector Complying to BS 336
    Pressure Rating Normal Working Pressure of 10 Bar
    Nominal Size 150 mm Ranged Outlet
    Test Pressure 20 Bar
    Flange Drilling BS 4504 Part : 2 : 1974 Table : 16/21
    Details

  • 4”x 2 WAY BREACHING INLET (FIRE BRIGADE CONNECTION)

    Model No. NDR 095
    Inlet Connection 2 Nos. Male Instantaneous Connector Complying to BS 336
    Pressure Rating Normal Working Pressure of 10 Bar
    Nominal Size 100 mm Flanged Outlet
    Test Pressure 20 Bar
    Flange Drilling BS 4504 Part: 2:1974 Table: 16/21
    Back
    Details

  • FIRE HOSE CABINET

    Details

  • HOSE PIPE ASSEMBLY (40 MM

    Model NHR 38V* NHR 64V
    FIRE HOSE
    Fire Hose Type Single jacket, Light weight, Thermoplastic lining with high tenacity filament polyester yarn, UL listed. Single jacket, Light weight Thermoplastic lining with high tenacity filament polyester yarn, UL listed
    Size & Color 1½" x 30Mtr., White 2½" x 30Mtr., White
    Service Pressure 250 PSI 250 PSI
    Proof Pressure 500 PSI 500 PSI
    Burst Pressure 750 PSI 750 PSI
    COUPLINGS
    Type 1-1½" NH Female Threaded Coupling, Brass 2-½" NH Female Threaded Coupling, Brass
    ANGLE VALVE
    Working Pressure 300 PSI 300 PSI
    Test Pressure 600 PSI 600 PSI
    NOZZLE
    Inlet Size 1.5" Female NST Threaded 2.5" Female NST Threaded
    Discharge rate (in full spray pattern) 130±5GPM @ 100PSI 205±5GPM @ 100PSI
    Details

  • LANDING VALVE

    Model No. NDR 098 NDR 097 NWR
    Valve Type Oblique, Flanged Inlet Oblique, Threaded Inlet Oblique, Pressure Reducing, Flanged Inlet
    Pressure Rating Low Pressure Valve Do High Pressure Valve
    Nominal Size DN50 DN 21/2" DN50
    Working Pressure 15 Bar Maximum Do 20 Bar Maximum
    Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Do Valve Seat Test at 22 Bar • Body Test at 30 Bar
    Flange Drilling BS 4504 Part 2:1974 Table:16/21 BS4504 Part: 2 :1974Table : 16/2
    Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure Do 8.5 L/S @ 4 Bar Outlet Pressure
    Min. Valve Pressure Regulating 4-12 Bar
    Details

  • BALL VALVE

    MODEL: SD-BLVT95

    • Female/Female threads.
    • Lever handle in steel
    • Full Port Valve
    • C37700 or C46500 Brass or Nickel plated
    • Working Temperature : -20°C to 110°C
    • Threads: NPT
    • Max. Working Pressure at 20°C with water-42 Bar for ¼” to 2” & 28 bar For 2½” to 4”
    Details

  • AUTO AIR VENT

    SPECIFICATIONS
    Sizes: ½”, ¾”, 1”
    Pressure Rating: 175 psi
    Body and Cover Ductile Iron ASTM A536 64-45-12
    Float Stainless Steel 316, ASTM A240
    Internal Parts Stainless Steel 316, ASTM A240
    Orifice Button EPDM
    Paint Specification Red Epoxy Painted
    •   Maintains system flow efficiency
    Operational Highlights •   Releases unwanted air pockets during system operation
    •   Protects system against air related surges
      AIR RELEASE VALVE - TECHNICAL DATA
    Model No. Valve Size Orifice Size Inlet Size NPT Outlet Size NPT Max W.P
    NF - 15 ARV ½" ¹/16" ½” ½" 175 psi
    NF - 20 ARV ¾" ¹/16” ¾" ½” 175 psi
    NF - 25 ARV 1" ¹/16” 1" ½” 175 psi
      Back
    Details

  • PRESSURE GAUGE

    DIAL SIZE 90mm (3½”)
    CONNECTION ¼” BSPT (¼” NPT Optional)
    RANGE 0-21 Kg/Sq. CM & 0-300 PSI
    BURDON TUBE & MOVEMENT Phosphorus Bronze Brudon tube and brass moving parts
    DIAL TYPE White background, Black graduation scale with dual reading in KG/SQM. and PSI
    CASE AND BAZEL Polished Stainless Steel Case Positive seal against weather moisture and dust.
    MOUNTING Direct
    WINDOW Hardened Glass
    ACCURACY ± 2% of FSD for middle half of scale.
    WEIGHT (APPROX) 0.3 Kg
    REFERENCE STANDARD UL 393, NFPA-13
    Details
Go to Top